Alloy 1085 Anodized Mirror Aluminum Plate Used For Grille Lamp
Aluminum mirror finish sheet, we also called it reflective aluminum sheet. The base material is bare aluminum sheet, and then we make a special treatment on the surface of aluminum sheet and stick a layer of high quality reflective material. The production are well and widely used in lights and lampshade, grille lamp line.
■Standard: GB 2794-81-84
■Alloy: 1060, 1085, 3003, 5052, 8011 And Etc
■Width: 30-1500mm (Usual:1000mm,1200mm,1250mm)
■Surface Treatment: Laminate, Polished, Anodized
■Useful Life: 10 Years Indoor, 2 Years Outdoor Under Sunshine
■Surface Reflectivity Reach 86%,Diffuse Reflection Less Than 12%
■Coil Weight: 1-3ton
Types of Mirror Aluminum:
|1||Laminate||Stick a layer of high reflective vacuum zincification compound materials, strength of adhesive meets requirements of GB 2794-81-84||1060& 3003/H14/H18/H16/H24|
|2||Polished||Surface treatment by polished||1060& 3003/H14/H18/H16/H24|
|3||Anodized||1-4 micron oxidation film||1085/H14/H18/H16/H24|
Anodized Mirror Aluminum:
This data sheet is as a guide only. Total reflectance is measured according to DIN5036-3. Guage tolerance is within 1/2 of AA standard. Protective tapes are recommended for all items.
1= low iridescence
2= very low iridescence
3= No Iridescence
I. Lighting: Such as grille lamp, lampshade, grille, diffuser of fluorescent lam
II. Reflector plate of solar energy
III. Exterior of construction
IV. Interior decoration, such as aluminum buckle plate, ceiling, curtain wall
VII. The face panel of household appliance, microwave oven, refrigerator, etc.
Export Standard Seaworthy Packing With Wooden Pallets In Horizontal Or Vertical (As Per The Requirements Of Clients)