With regard to the specifications of colour coated aluminium channel letter coil, the exact parameters may vary depending on the manufacturer, product range and application. In general, when colour coated aluminium coils are used for channel lettering, a number of aspects need to be considered, such as thickness, width, type of coating, colour and mechanical properties.

Here are some of the specification parameters that may be involved

Thickness: the thickness of an aluminium coil will have a direct impact on its strength and longevity. Common thicknesses may range from 0.3 to 1.5mm, depending on the application requirements.

Width: The width of the aluminium coil is also determined by the specific needs. Different widths of aluminium coils can be used to meet the needs of different sizes and shapes of side channel lettering production.

Coating type: Colour coated aluminium coils are available in a variety of surface coatings, such as polyester coating, fluorocarbon coating and so on. The choice of coating will affect the appearance, weather resistance and service life of the aluminium coil.

Colour: Colour coated aluminium coils are available in a wide range of colours, which can be selected according to the design requirements.
Mechanical properties: including tensile strength, yield strength, elongation, etc. These indicators will affect the processing performance of the aluminium coil and the quality of the final product.

About Dingang/Senruida

Dingang/Senruida has been a professional manufacturer and experienced exporter of new material,focuses on R&D,manufacturing,processing high-end roller-coating aluminium coil material products since 2002.

For the past decades,we’ve been growing rapidly in the industry,owning two plants of 160,000 ㎡ with eight large automatic roller coating lines for aluminium sheet material products.In addition,we have stretching-bending rectifier,cleaning,draw bench,embossing,cross-cutting and vertical slitting machines.With an annual deep processing capacity of more than 20,000 tons. Over 300 skillful workers,with over 200 major projects completed worldwide,our workers pride themselves in production high quality products and taking on projects with a high level of difficulty in fabrication and coating.

In our trade with merchants of various countries,we always adhere to the principle of equality and mutual benefit.It is our hope to promote,by joint efforts,both trade and friendship to our mutual advantage.

Why Choose us?

1.We are The Professional Manufacturer For Coated Aluminum Coil and Sheet .
Choose us , you can save a lot us time from the trader business, We get your offer and produce the order as your request directly. and we are the professional in this industry , it is easy to understand what you want to get, Let us know what products you are produce for ,then we can according to your requirements recommend the material for you.

2.We Dipped In The Coated Aluminum Industry More Than 30 Years.
From 1992, We started from a school subsidiary house for printing the paper. Then we went up year by year. We went through the Asian financial crisis in 1997, the global financial crisis in 2008,then became more and more stronger, in order to save energy for our company, Our market from developed countries such as U.S., U.K. to South-east countries, then back to Europe and Domestic market. We have owned more and more clients feedback due to the well reputation from the crisis.

3.We Export The Coated Aluminum Products More than 100 Countries worldwide.
It is the most important that we are well known the requirement from different countries with different standards. FromAmerican stand to Europe Standard, We can easy to identify and strictly according to it. Also we are well know the different rule from different countries such as American clients well need the thickness in plus tolarance,but it should be minus tolarance thickness in south-east asia and Africa area.

4.We Never use the Re-Cycle Alumiunm Material.
All of us know that aluminm are the re-cycle alloy that can save energy for our earth. but most of the color coated aluminum products are used in very strict and inclement weather district. The re-cycle aluminum can not staisfy the requirement of it . That's why we can continue our business for more than 30 years here and this is the reason why more and more clients choose us with our coated aluminum products.

5.Full Quality Test Room We Have In Our Company Before the Order Loading Out.
Here in our company we have a full set of machines that can test any items of the coated aluminum quality such as coating thickness, Analysis of the Coating Content, The Aluminum Alloy Components, Temper, Tensile, Hardness,Etc., All the material that ship out to any countries should be test all the items during the production.

6.Worldwide serve systems.
We have the 24 hours business service and we can solve any problem from North America to South Africa in one-day-time.

Our payment term

• T/T- 30% T/T in advance, the balance 70% see copy of B/L (CFR, CIF term)
• T/T- 30% T/T in advance, the balance 70% before shipment (FOB term)
• L/C- 30% T/T in advance, the balance 70% via 100% irrevocable L/C at sight

Our Packing & Shipment Loading

FAQ

A1: How can I get a quotation from you ?
Q1:You can leave us message, and we will reply in time. Or we may talk on line by WhatsApp.

A2:Can I get samples before order ?
Q2:Yes, of course. Usually our samples are free.

A3:How do you make our business long-term and good relationship?
Q3: We keep good quality and competitive price to ensure our customers benefit ;We respect every customer as our friend and we sincerely do business and make friends with them,? no matter where they come from. Please feel free to leave us message if you have any question about us and our products.